Skip to main content

DMCA

DMCA

If we Have added some content that belong to you or your organization by mistake, We are sorry for that. We apologize for that and assure you that this wont be repeated in future. If you are rightful owner of the content used in our Website, Please mail us with your Name, Organization Name, Contact Details, Copyright infringing URL and Copyright Proof (URL or Legal Document) at helpkumarstudy@gmail.com

I assure you that, I will remove the infringing content Within 48 Hours.

Comments

Post a Comment

Popular posts from this blog

About N-Type and P-Type Semiconductor | Materials | Example |

Here you will know about  n type and p type semiconductor in details. You can already see about bonding in semiconductor . N type and P type semiconductor is used in electronic appliances.which is the basis of working of all the electronic devices.So lets discuss in this given topic in the details. N type and P Type Semiconductor When some impurities added to the pure semiconductor then it becomes extrinsic semiconductor and this process of adding impurities is known as doping.  Now it depends on the which type of impurities it added to the semiconductor (two types of impurities can be added to semiconductor pentavalent or trivalent). n-type semiconductor : If impurity that is added to the pure semiconductor is a pentavalent ( which has five valance electron ) then it is called n-type semi conductor. p-type semiconductor : If trivalent impurity is added to the semiconductor then it becomes p-type semi conductor. ( Note-List of  n type and p type semiconductor material is given below.

Biasing of p–n Junction | Forward and Reverse-biased |

Biasing the p-n junction means applying some external voltage to both sides of the p-n junction. Reverse-biased junction and forward-biased junction are two types of biased junction. You should have also good understanding of  N-Type and P-Type Semiconductor before moving towards this topic. Biasing of p–n Junction  Biasing of a p–n junction  means uses of some external voltage across the two sides of the p–n junction. It is divided into two groups  Forward-biased junction :  When the p-side of junction  is connected to the positive terminal of a battery and the n-side of junction is connected to the negative terminal, the p–n junction is said to be a forward-biased junction.  Reverse-biased junction  :If the positive terminal of the battery is connected to the n-side of junction and the negative terminal on the p-side, the p–n junction is said to be a reverse-biased junction. Now we will see about forward and reverse-biased junction in detail.  Related Topic    Bonding in semiconduc

Engineers Files Explained | Types of file

Today we will learn about engineers files explained, as we know hand tools are used to remove small amounts of material, usually from small areas of the workpiece.   Do you know why hand tools are used ?Hand tools are used because of following reason: If no machine is available,  The workpiece is too large to go on a machine  The shape is too intricate or simply that it would be too expensive to set up a machine to do the work. As you know the necessity of a hand tools now we will know about a hand tool , engineer's files. Engineer’s files Files are used to perform a variety of tasks, from simple removal of sharp edges to producing complex shapes where use of the device is impractical.Files can be obtained in a variety of shapes and in lengths from 150 mm to 350 mm. Single-cut file: When a file has a single series of teeth cut across its face it is called  single-cut file ,Figure of single-cut file is shown below. double-cut file: When a file has double series of teeth cut across